HRD users:

1. First of all You have to make an ADI file from Your HRD Logbook file data. This is done in the HRD program.
You have to use the ADIF + HRD Radio Deluxe checkbox!

nGenLog users:

1. First of all You have to make an ADI file from nGenLog Logbook. This is done in the nGenLog program.

For HRD and nGenLog users:

2. Now You have to convert the ADI file to files which can be displyed in the DxAtlas program. Use this program DxAtlas_display.exe.

2.1 Load the Logbook ADI file. Use the button "Load ADI".

2.2 Mark the option/s You like to use.

2.3 Use the button "Wkd/Cfm" to set the directory and the file names You want to use for the DxAtlas files "File name.wkd" and "File name.cfm".

2.4 Use the button "Pins" to set the directory and the file name You want to use for the DxAtlas files "File name.pin".

2.5 Use the button "Convert ADI to DxAtlas" to start the convertsion to DxAtlas files.

2.6 When done use the button "Return".
You can do as many different files You want from the ADI file by using different options (2.1.2)

3. Use the button "Display Data on DxAtlas" to display data from the nGenLog or HRD Logbook file data into DxAtlas.
The program DxAtlas will start automatically if You have done a standard installation of the program.
The DxAtlas_display program can do the following
-display up to 7 different pin files
-display a Label for each file
-display a Main label
-edit/save the labels used

4. If You want to display the Gridsquares worked and Gridsquares confirmed You can use the DxAtlas menu "File, Load, Gridsquare List ...".




 

 My Rig Software page